Microcontrol I/O Modules -BOX variant
Available in following variants:
- 1 x Analogue IN (1-channel Analogue Input Voltage/ Current with CANopen) – µCAN.1.ai-BOX
- 1 x Pressure IN (1-channel Strain Gauge Acquisition with CANopen) – µCAN.1.sg-BOX
- 1 x Temperature IN (1-channel Analogue Input Temperature Pt100/ Thermocouple with CANopen) – µCAN.1.ti-BOX
- 4 x Analogue IN (4-channel Analogue Input Voltage/ Current with CANopen) – µCAN.4.ai-BOX
4 x Analogue OUT (4-channel Analogue Output Voltage/ Current with CANopen) – µCAN.4.ao-BOX
- 4 x Counter IN (4-channel Digital Counter with CANopen) – µCAN.4.ci-BOX
- 4 x Pressure IN (4-channel Analogue Input Strain Gauge with CANopen)- µCAN.4.sg-BOX
- 4 x Temperature IN (4-channel Analogue Input Temperature PT100/ Thermocouple with CANopen) – µCAN.4.ti-BOX
- 8 x Digital IN/OUT (8-channel Digital Input/ Digital Output with CANopen/ CANopen FD/ J1939) – µCAN.8.dio-BOX
- 8 x PWM (8-channel Pulse Width Output (PWM) with CANopen) – µCAN.8.pwm-BOX
- Aluminium Casting with IP66 protection
- Cable glands or M12 plug-in connectors
- CANopen/ J1939 (50kBit/s to 1Mbit/s)
- Easy diagnosis of CAN state via two LEDs in the device
- Module monitoring via heartbeat function
- Mechanical shock resistance of up to 40 G (optional)
- Wire break and short circuit detection
- Up to 16-bit/ 24-bit resolution for standard signals ±10V, 0-20mA, 4-20mA
- Temperature measurement at 16-bit resolution
- Pt100 and thermo signal type J, K and L
- Precise 16-bit D/A converter
- Accuracy voltage output: 1mV
- Accuracy current output: 1µA
- The resisting bridge data will be acquired Internal power supply of strain gauge bridge
- Outputs to be loaded up to 1.4 A (PWM module) at a total sampling rate of 400 Hz
